Purpose: Used to expand calculation details in the specified output table for the specified location.
--> Given in girder input
Expands output to show how values in the table are determined. The parameter [OUTPUT] describes the table in which the detailed calculations appear. The parameter [X] is the distance from the first support that corresponds to the line of the specified table. For example DETAILED CALCS FOR WEB SPLICE AT LOCATION 83.5 would expand the calculations for the web splice located at 83.5 feet from the first support of the girder. Note: this condition can only be used for one location at a time, and the location must be listed in the table.
[OUTPUT] = ALLOWABLE BEND BUCKLING
Expands LRFD bottom flange permanent deflection control stress output
[OUTPUT] = POSITIVE BENDING STRENGTH
[OUTPUT] = NEGATIVE BENDING STRENGTH
Expands LFD and LRFD factored bending strength output
[OUTPUT] = BOX GIRDER SHEAR STRESS
Expands ASD shear stress output
[OUTPUT] = CB
Expands Cb information in bottom of LRFD factored bending stress tables.
(Note: For Cb the detailed calcs command requires the additional argument "FOR VALUE", for example:
DETAILED CALCS FOR CB AT LOCATION 100.00 FOR VALUE 1.3487)
[OUTPUT] = COMPACTNESS
Expands LFD factored bending strength output
[OUTPUT] = LANE FRACTIONS
Expands LRFD lane fractions table output
[OUTPUT] = NEGATIVE PLASTIC MOMENT
Expands LRFD plastic moment table output
[OUTPUT] = POSITIVE PLASTIC MOMENT
Expands LRFD plastic moment table output
[OUTPUT] = SHEAR STRENGTH
Expands LFD shear capacity output
[OUTPUT] = SHEAR CONNECTOR SPACING
Expands LRFD shear connector spacing output
[OUTPUT] = WEB SPLICE
Expands LRFD bolted web splice output