Layout Definition Input Reference

 

DATA ITEMS

 

ADDBNODE        (in g system projects by direct edit only)

 

ADDMEM            (in p/c system projects with Define:Layout:Customize Generated Geometry:Adding Bracing)

 

ADDSUP             (in p/c system projects with Define:Layout:Customize Generated Geometry:Adding Supports)

 

ADN-i                 (in p/c system projects with Define:Layout:Customize Generated Geometry:Adding Nodes to Girders)

 

BBDL                  (only available by direct editing)

 

BR                      (generated in system projects)

                          (in line girder projects with Define:Layout:Intermediate Bracing Locations)

 

BR-i                    (in p/c system projects with Define:Layout:Bracing Layout:Intermediate Bracing Locations)

 

BRBF                  (only available by direct editing)

 

BRINCD              (in g system projects with Define:Layout:Bracing Layout:Bracing Incidences)

 

BSK-i                  (in p/c system projects with Define:Layout:Bracing Layout:Intermediate Bracing Skew Angles)

 

CHGCURVE          (in p/c system projects with Define:Layout:Horizontal Curvature of Girder 1)

 

DELMEM              (in p/c system projects with Define:Layout:Customize Generated Geometry:Removing Bracing)

 

DELSUP               (in p/c system projects with Define:Layout:Customize Generated Geometry:Removing Supports)

 

FAS-i                    (in g system projects with Define:Layout:Partial Fascia Girders)

 

GCD-i                   (in g system projects with Define:Layout:Girder Coordinates)

 

GDSPC                 (in p/c system projects with Define:Layout:Girder Spacing)

 

HINGE                 (in line girder projects with Define:Layout:Hinges)

 

HNG-i                  (in system projects with Define:Layout:Supports/Hinges:Hinges)

 

HTR-i                   (in system projects by direct edit only)

 

INB-i                   (in system projects by direct edit only)

 

ISP-i                    (in p/c system projects with Define:Layout:Supports/Hinges:Integral Supports)

                            (available in g system projects only by direct editing)

 

ITGSUP                (in p/c system projects with Define:Layout:Supports/Hinges:Integral Supports)

 

KFP-i                    (in p/c system projects with Define:Layout:Supports/Hinges:Springs at Supports)

                            (available in g system projects only by direct editing)

 

KFT-i                    (in p/c system projects with Define:Layout:Supports/Hinges:Springs at Supports)

                            (available in g system projects only by direct editing)

 

KFV-i                    (in p/c system projects with Define:Layout:Supports/Hinges:Springs at Supports)

                             (available in g system projects only by direct editing)

 

KMB-i                   (in p/c system projects with Define:Layout:Supports/Hinges:Springs at Supports)

                            (available in g system projects only by direct editing)

 

KMT-i                   (in p/c system projects with Define:Layout:Supports/Hinges:Springs at Supports)

                            (available in g system projects only by direct editing)

 

NBPIER                (in p/c system projects with Define:Layout:Bracing Layout:Bracing Along Piers)

 

NSUPBR               (in line girder projects with Define:Layout:Bracing at Supports)

 

RAD                     (generated in system projects, not applicable to line girder projects)

 

RAD-i                   (in p/c system projects with Define:Layout:Horizontal Curvature of Girder 1)

                            (in g system projects with Define:Layout:Horizontal Curvature)

 

RCEN                   (generated in system projects, can be modified by direct editing, not applicable to line girder projects)

 

SKEW-1               (in p/c system projects with Define:Layout:Support Skew at Girder 1)

 

SLP-i                    (in g system projects with Define:Layout:Supports/Hinges:Pseudo Supports)

 

SPN                     (generated in system projects)

                           (in line girder projects with Define:Layout:Span Lengths)

 

SPN-1                 (in p/c system projects with Define:Layout:Span Lengths of Girder 1)

 

STP-i                  (in p/c system projects with Define:Layout:Supports/Hinges:Support Translation Releases)

                          (in g system projects by direct edit only)

 

STRLIN              (in p/c system projects with Define:Layout:Girders Acting as Stringers)

                          (in g system projects by direct edit only)

 

SUP-i                 (in g system projects with Define:Layout:Supports/Hinges:Support Nodes)

 

 

CONDITION ITEMS

 

BOX GIRDER BRIDGE

        (in p/c system projects with Define:Layout:Type of Girders)

 

DISCONTINUOUS AT PIER FOR NONCOMPOSITE DEAD LOAD

        (in system projects by direct edit only)    

 

INTEGRAL ABUTMENTS

        (in p/c system projects with Define:Layout:Supports/Hinges:Integral Supports)

        (in g system projects with Define:Layout:Supports/Hinges:Support Types)

        (in line girder projects with Define:Layout:Abutment Type)

 

NO BRACING ALONG PIERS

        (in p/c system projects with Define:Layout:Bracing Layout:Bracing Along Piers)

 

STRAIGHT FOLDED GIRDERS

        (in g system projects with Define:Layout:Horizontal Curvature)

 

 

Related topics:

Overview of Parallel/Concentric Girder System Layout Definition

Overview of General Girder System Layout Definition

Overview of Line Girder Layout Definition